IEEE Transactions on Components and Packaging Technologies · 2000 · 37 citations · 4 references
EngineeringComputer EngineeringMechanical EngineeringAir ConditioningHeat TransferThermal AnalysisBuilding Cooling SystemsCooling SystemsHeat ExchangersPassive CoolingThermal DesignThermal ManagementCooling System ArchitectureCooling System DesignHeat DissipationHeat Pipe CoolingHeat Pipe TechnologyHeat PipesHeat SinksHybrid Cooling
This paper describes various cooling solutions using heat pipes for cooling a notebook PC. These are: 1) heat pipe with heat spreader plate; 2) hybrid system-i.e., heat pipe with heat sink and fan; and 3) hinged heat pipe system. For heat input of less than 12 W, the thermal resistance measured between the surface of the CPU to ambient was obtained as follows: greater than 8/spl deg/C/W for system 1) and 4-6/spl deg/C/W for systems 2) and 3). For the CPU having specification of surface temperature of 95/spl deg/C and 40/spl deg/C ambient, then system 1) can be dissipated by about 6 W, whereas systems 2) and 3) can handle 13 W. Experimental results of these three systems are included and discussed in this paper.
4
95/03996 Heat pipe science and technology
Fuel and Energy Abstracts · 1995 · 1.5K citations
Thermal solutions to Pentium processors in TCP in notebooks and sub-notebooks
Hong Xie, M. Aghazadeh, W. Lui et al. · 2002 · 17 citations
Hinged heat pipes for cooling notebook PCs
Masahito Mochizuki, Yuji Saito, Kazuhiko Goto et al. · 2002 · 12 citations