Publication | Closed Access
A 1.8-GHz LC VCO with 1.3-GHz tuning range and digital amplitude calibration
333
Citations
18
References
2005
Year
Analog-to-digital ConverterRadio FrequencyHigh-frequency DeviceCalibration1.8-Ghz Lc VcoMixed-signal Integrated CircuitPhase Noise1.3-Ghz Tuning RangeWide BandDigital Amplitude CalibrationInstrumentationRf Subsystem
A 1.8-GHz LC VCO designed in a 0.18-/spl mu/m CMOS process achieves a very wide tuning range of 73% and measured phase noise of -123.5 dBc/Hz at a 600-kHz offset from a 1.8-GHz carrier while drawing 3.2 mA from a 1.5-V supply. The impacts of wideband operation on start-up constraints and phase noise are discussed. Tuning range is analyzed in terms of fundamental dimensionless design parameters yielding useful design equations. An amplitude calibration technique is used to stabilize performance across the wide band of operation. This amplitude control scheme not only consumes negligible power and area without degrading the phase noise, but also proves to be instrumental in sustaining the VCO performance in the upper end of the frequency range.
| Year | Citations | |
|---|---|---|
Page 1
Page 1