Three-dimensional millimeter-wave imaging for concealed weapon detection

David M. Sheen, Douglas L. McMakin, Thomas E. Hall

IEEE Transactions on Microwave Theory and Techniques · 2001 · 1.6K citations · 26 references

Concepts

TL;DR

Millimeter‑wave imaging, derived from microwave holography, has been developed at PNNL for detecting concealed weapons because it is non‑ionizing, penetrates clothing, and reflects from both the body and hidden items. This paper presents a wide‑bandwidth, three‑dimensional holographic microwave imaging technique. The authors built a prototype that uses a 27–33 GHz linear sequentially switched array and a high‑speed linear scanner to achieve 3–10 s scan times suitable for high‑throughput security checkpoints. The system is described in detail and accompanied by numerous imaging results.

Abstract

Millimeter-wave imaging techniques and systems have been developed at the Pacific Northwest National Laboratory (PNNL), Richland, WA, for the detection of concealed weapons and contraband at airports and other secure locations. These techniques were derived from microwave holography techniques that utilize phase and amplitude information recorded over a two-dimensional aperture to reconstruct a focused image of the target. Millimeter-wave imaging is well suited for the detection of concealed weapons or other contraband carried on personnel since millimeter-waves are nonionizing, readily penetrate common clothing material, and are reflected from the human body and any concealed items. In this paper, a wide-bandwidth three-dimensional holographic microwave imaging technique is described. Practical weapon detection systems for airport or other high-throughput applications require high-speed scanning on the order of 3 to 10 s. To achieve this goal, a prototype imaging system utilizing a 27-33 GHz linear sequentially switched array and a high-speed linear scanner has been developed and tested. This system is described in detail along with numerous imaging results.

References

26