Range-Doppler Imaging of Rotating Objects

Jack Walker

IEEE Transactions on Aerospace and Electronic Systems · 1980 · 726 citations · 12 references

Concepts

TL;DR

In range‑Doppler imaging, rotating targets can smear across resolution cells during integration, degrading image quality. Motion is compensated by storing processed pulses, using antenna angles to locate points, and treating the data as a 3‑D Fourier transform of reflectivity that is inverted; the approach also analyzes geometry with separate source and receiver. Experiments on a microwave test range show that correcting system aberrations improves image quality.

Abstract

During the integration time required to obtain fine Dopplerfrequency resolution in a range-Doppler imaging radar, a point on a rotating object may move through several range and Doppler resolution cells and produce a smeared image. This motion can be compensated by storing the appropriately processed return pulse, and the angular coordinates are determined by the angular coordinates of the radar antenna. The resulting stored data represents the three-dimensional Fourier transform of the object reflectivity density, and hence can be processed by an inverse Fourier transformation. Also included is an analysis of the three-dimensional radar/object geometry with separate source and receiver locations. The effects of various system aberrations are investigated and experimental results from a microwave test range which demonstrate the image improvement are presented.

References

12