Nanotechnology · 2014 · 16 citations · 32 references
Natural SciencesMaterials EngineeringMaterials ScienceNanomaterialsSemiconductor MaterialsThin FilmsPhotovoltaic MaterialsSemiconductor NanomaterialsSemiconductor Thin FilmsSolar Cell MaterialsSolar CellsThin-film DepositionFilm ThicknessNanorodsNanostructured Solar CellsPower ConversionPower Conversion EfficiencyPrecursor ChemistryPrecursor MaterialsSolar Cell Fabrication
In this study we demonstrate the fabrication of CuInGaS₂ (CIGS) thin film solar cells with a three-dimensional (3D) nanostructure based on indium tin oxide (ITO) nanorod films and precursor solutions (Cu, In and Ga nitrates in alcohol). To obtain solution processed 3D nanostructured CIGS thin film solar cells, two different precursor solutions were applied to complete gap filling in ITO nanorods and achieve the desirable absorber film thickness. Specifically, a coating of precursor solution without polymer binder material was first applied to fill the gap between ITO nanorods followed by deposition of the second precursor solution in the presence of a binder to generate an absorber film thickness of ∼1.3 μm. A solar cell device with a (Al, Ni)/AZO/i-ZnO/CdS/CIGS/ITO nanorod/glass structure was constructed using the CIGS film, and the highest power conversion efficiency was measured to be ∼6.3% at standard irradiation conditions, which was 22.5% higher than the planar type of CIGS solar cell on ITO substrate fabricated using the same precursor solutions.
32
Matthew G. Panthani, Vahid A. Akhavan, Brian W. Goodfellow et al. · Journal of the American Chemical Society · 2008 · 918 citations