IEEE Microwave and Wireless Components Letters · 2001 · 76 citations · 11 references
EngineeringElectrical EngineeringMicroelectronicsMicrowave EngineeringSemiconductor DevicesMems CharacterizationMems DesignMems FabricationMems SwitchesMicrowave Integrated CircuitsRf MemsHigh-frequency IsolationInsertion LossInsertion Loss MeasurementMicrowave SwitchesOhmic Rf Mems SwitchesReflection Coefficient MeasurementRf Mems SwitchesSilicon
This paper presents the design, fabrication and measurement of single, T-match and /spl pi/-match W-band high-isolation MEMS shunt switches on silicon substrates. The single and T-match design result in -20 dB isolation over the 80-110 GHz range with an insertion loss of 0.25/spl plusmn/0.1 dB. The /spl pi/-match design results in a reflection coefficient lower than -20 dB up to 100 GHz, and an isolation of -30 to -40 dB from 75 to 110 GHz (limited by leakage through the substrate). The associated insertion loss Is 0.4/spl plusmn/0.1 dB at 90 GHz. To our knowledge, this is the first demonstration of high-performance MEMS switches at W-band frequencies.
11
Performance of low-loss RF MEMS capacitive switches
Charles L. Goldsmith, Zhimin Yao, S. Eshelman et al. · IEEE Microwave and Guided Wave Letters · 1998 · 428 citations