Journal of The Electrochemical Society · 1993 · 102 citations · 0 references
Natural SciencesMaterials EngineeringMaterials ScienceCrystal StructureMaterials CharacterizationThin FilmsBattery Cell ChemistryBattery MaterialsElectrode MaterialsEnergy Storage MaterialsPhase IdentificationThin Film Electrical PropertiesElectrochemical MeasurementsLaser AblationLithium-ion Battery Cathode MaterialsLithium-ion Battery Electrodes Based On Metal OxidesLow-temperature MaterialsRechargeable BatteriesThin Oxide FilmsThin-film Batteries
Thin films of are obtained by Laser ablation from sintered targets. The films were deposited on stainless steel or tantalum foil substrates so they could be used as cathodes in rechargeable thin‐film lithium batteries. The films are amorphous when deposited on unheated substrates, but crystallize readily when heated in air above 500°C. Using x‐ray diffraction, we show that the films are basically stoichiometric and have no impurity phases present. They consist partly of the normal bulk phase which can be prepared by reacting and at 850°C. However, the films also contain some of the new, low temperature phase recently reported by Gummow et al. In order to understand our films better we have synthesized bulk low temperature from and at 400°C to measure its structure and electrochemical properties. Although the crystal structures of the high and low temperature phases do differ, they are similar enough that quantitative estimates of the amount of each phase present in our films based on diffraction data alone is difficult. On the other hand, electrochemical measurements can distinguish between the high and low temperature phases.