THM Growth and Characterization of 100 mm Diameter CdTe Single Crystals

Abstract

The THM growth technology for 100 mm diameter CdTe single crystals has been intensively developed. In consequence of the optimization of growth conditions, we have succeeded in controlling growth interface shape and growing 100 mm diameter CdTe single crystals with 300 mm in length. Concerning the behavior of Te inclusions in the grown crystal, their size and density were investigated by IR transmission microscopy. The size distribution of Te inclusions was divided into two groups, and the density of them was less than 1 times 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">5</sup> cm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-3</sup> . Charge transport properties of the grown crystal were investigated by using the ldquomutau-modelrdquo spectral fitting method, and were found to be quite uniform all over the wafer. To investigate the homogeneity of radiation detector performances, Ohmic type and Schottky type detectors with 4 mm times 4 mm times 1 mm were fabricated from the left half and the right half of the 100 mm diameter wafer, respectively. Standard deviations of their energy resolutions for the 122 keV line from <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">57</sup> Co were less than 6%. This excellent uniformity is essential for the room temperature semiconductor detectors in the major application areas, such as medical imaging, non-destructive inspection and homeland security.