Materials Research · 2013 · 21 citations · 17 references
Natural SciencesChemical EngineeringMaterials EngineeringMechanical Behavior Of MaterialsPolymer ChemistryPolymer EngineeringBiodegradable PolymersBiodegradationMaterial DegradationPolymer DegradationPolymer FoamsSoil DegradationBlowing AgentsDegradationFoam DecayFoam Mechanical PropertiesFoamsPoly(lactic Acid)Polylactic Acid DegradationSingle-screw Extrusion
This work examined the influence of different chemical blowing agents (CBA), one endothermic and one exothermic, at the same concentration (2% by mass), on poly(acid lactic), PLA foams. The CBA was incorporated into the PLA in a single-screw extruder, and the foams were expanded by heating in an electric oven under free pressure conditions. Foam degradation in a simulated soil was performed according to the ASTM G160-03 standard. Changes in the physical-chemical, morphological and mechanical properties were used to evaluate the degradation. The results indicated that the different chemical blowing agents led to different mechanical and morphological properties for the foams, which resulted from the nature and decomposition rate of the blowing agents. Cells in the foams accelerated the degradation since they facilitated the infiltration of water toward the interior of the polymer and triggered the degradation process by hydrolysis.
17
Processing technologies for poly(lactic acid)
Loong‐Tak Lim, Rafael Auras, Maria Rubino · Progress in Polymer Science · 2008 · 2.7K citations
Additives for Polymers · 1991 · 953 citations