IEE Proceedings - Science Measurement and Technology · 2000 · 103 citations · 11 references
EngineeringElectrical EngineeringPhysicsMicroelectromechanical SystemsMicroelectronicsSeparation ProcessesAnode MaterialsX-ray Photoelectron SpectroscopyBreakdown CharacteristicsBreakdown MechanismsBreakdown VoltageElectrical BreakdownElectrical Breakdown In AirElectrical Breakdown StrengthSpacingsWork Function
For efficient operation, micromotors and microactuators, such as those employed in microsystems, are required to operate with high electric fields at electrode separations of the order of micrometres. An apparatus was built to accurately measure the breakdown voltage for electrode spacings as low as 0.5 µm. Breakdown voltage measurements in air and nitrogen are presented and discussed for the gap range 0.5 to 15 µm. Energy dispersive analysis of X-rays (EDAX) confirms the transfer of material from cathode to anode and vice versa during the breakdown mechanism. The Paschen law has been confirmed not to be applicable at gap settings of less than 4 µm. The shape of the curve and the breakdown voltage values are found to be the same for different gases and different high pressures up to 4 µm separation. Below this value, an analytical explanation of the breakdown voltage based on quantum tunnelling of electrons is obtained in terms of electrical field enhancement at microprotrusions and the work function of the electrode material.
11
Conduction of Electricity through Gases.
Sir J. J. Thomson, George Paget Thomson · The Journal of Physical Chemistry · 1934 · 652 citations
Natural Sciences, Chemistry, Physics +17
IC-processed electrostatic micromotors
Long-Shen Fan, Yu‐Chong Tai, R.S. Muller · Sensors and Actuators · 1989 · 488 citations
Electric field breakdown at micrometre separations
J-M Torres, R. S. Dhariwal · Nanotechnology · 1999 · 177 citations
Electrical Breakdown between Close Electrodes in Air
L. H. Germer · Journal of Applied Physics · 1959 · 108 citations