2003 · 57 citations · 4 references
EngineeringElectrical EngineeringMicroelectronicsMicrofabricationMicrowave EngineeringMems DesignMems FabricationMicrowave Integrated CircuitsMicrowave System DesignMillimeter-wave CommunicationsRf MemsConductor SizingMicrowave Phase Shifter DesignMillimeter-wave Integrated CircuitsPhase ShiftersQuartzRf Mems Phase Shifters
The design and optimization of a 0-60 GHz distributed MEMS true-time delay phase shifter is presented with theory verified by experimental results. The phase shifters are fabricated on 500 /spl mu/m quartz with a fixed total CPW width of 300 /spl mu/m. Three lines with center conductor widths of 50, 100, and 150 /spl mu/m have been fabricated. The line with a 100 /spl mu/m center conductor width is shown to be optimal for phase shift per dB loss. The measured results demonstrate 70/spl deg//dB at 40 GHz and 900/dB at 60 GHz. The current design, with C/sub max//C/sub min/=1.17, is capable of producing 360/spl deg/ phase shift at 40 GHz with 5.1 dB loss and at 60 GHz with 4 dB loss which is state-of-the art performance for millimeter-wave phase shifters. Also, it is shown that if a C/sub max//C/sub min/=1.3 can be achieved, then the performance increases to 1000/dB at 40 GHz.
4
Characteristics of micromachined switches at microwave frequencies
C. Goldsmith, John N. Randall, S. Eshelman et al. · 2002 · 217 citations