The Stress of Electroless Nickel Deposits on Beryllium

Kevin T. Parker, Hemant Shah

Journal of The Electrochemical Society · 1970 · 11 citations · 0 references

Concepts

Abstract

The residual stress of electroless nickel coatings on one side of 0.01 in. beryllium strips was determined by bow deformation measurements. Different plating conditions can produce either a tensile or compressive stress. The parameters controlling stress are those which determine the phosphorus content of the deposit, of which pH is the most important. The stress increases in the negative direction with increase in phosphorus content of the deposit. "As‐plated" 4 mil coatings containing more than 8.5% phosphorus are compressively stressed, while those with lower phosphorus content are in tensile stress. Contraction during annealing decreases the compressive and increases the tensile stress of the plate. With close control of the plating parameters, reproducible, essentially "stress‐free" electroless nickel coatings can be plated on critical optical beryllium surfaces such as aerospace mirrors.