IEEE Transactions on Microwave Theory and Techniques · 1970 · 313 citations · 8 references
EngineeringElectrical EngineeringElectronic MaterialsMicroelectronicsMicrowave EngineeringDielectricsIntegrated Circuit DesignMicrowave FiltersMicrowave Integrated CircuitsMicrowave Network AnalysisRadio-frequency Integrated CircuitsCapacitanceCapacitorsDielectric ConstantInductorsInsertion LossInterdigital CapacitorsOptimal DesignReturn Loss
An analysis of the frequency response of interdigital capacitors, which leads to an optimal design, is given along with an expression for their static gap capacitance. The capacitor Q is given in terms of its geometry which consists of a planar interdigital thin-filrn conductor deposited on the surface of a relatively high dielectric constant substrate. Capacitance values ranging from 0.1 to 10 pF at L band with measured Q's in excess of 400 are realizable using 2-mil line and space widths on a 99.5-percent alumina substrate with a dielectric constant of 10.3. Experimental results obtained with a lumped-constant nine-section S-band Chebyscheff low-pass filter realized using spiral inductors and optimal designed interdigital capacitors are shown to be in excellent agreement with theory. The filter had less than 0.8-dB insertion loss and greater than 25dB return loss in the passband. The filter occupies an area 6.50 by 200 roils on a 24-mil-thick substrate.
8
Foundations for Microwave Engineering
P.J.B. Clarricoats · Electronics and Power · 1967 · 2.7K citations