2004 · 51 citations · 10 references
EngineeringElectrical EngineeringAnalog ElectronicsMicroelectronicsMicrowave EngineeringCmos Circuit DesignHigh-frequency Semiconductor DevicesMicrowave Integrated CircuitsMicrowave OscillatorsMixed-signal Integrated Circuit DesignRadio-frequency Integrated CircuitsClippingCmos OscillatorsCmos Radio-frequency CircuitsMillimeter-wave Integrated CircuitsPhase NoisePower OutputRadio-frequency Integrated Circuit DesignRf Cmos Design
A fully integrated 20 GHz frequency source is implemented with a VCO and a doubler in a 0.18 /spl mu/m CMOS process. A 10 GHz quadrature voltage controlled oscillator (QVCO) is implemented using a transformer-coupled resonator. The VCO can be tuned between 10.2 and 11.4 GHz and has low phase noise of -118.67 dBc/Hz at 1 MHz offset frequency with 1.8 V power supply. The figure of merit (FOM) is 188 dB. The 20 GHz differential signal is generated by harmonics of quadrature signals of the VCO with a balanced frequency doubler. To increase the output power of the harmonics, pinch-off clipping is used without any buffers or DC level shifter, since the proposed VCO has RF signals with low DC level. The frequency multiplier, the output of which can be tuned between 19.8 and 22 GHz, has a low noise of - 111.67 dBc/Hz at 1 MHz offset frequency. The phase noise of the multiplier is 7 dB higher than that of the VCO. The output power is -6.83 dBm and the VCO output power is -6 dBm.
10
HongMo Wang · 2002 · 42 citations
A miniaturized K-band balanced frequency doubler using InGaP HBT technology
Dong‐Woo Kang, Donghyun Baek, Sanghoon Jeon et al. · 2003 · 27 citations