2006 · 51 citations · 3 references
EngineeringElectrical EngineeringLow-power DesignMicroelectronicsMicrowave EngineeringCmos Circuit DesignMicrowave OscillatorsPower OptimizationPower-aware DesignRadio-frequency Integrated CircuitsWireless Power TransferCmos OscillatorsLow-power Cmos DesignLow-voltage Cmos DesignPower ConsumptionPower Consumption OptimizationRf Cmos DesignVoltageVoltage References
A 0.8V nano-power relaxation oscillator for EPC standard UHF RFID transponder is presented. A low-voltage inverted mirror feedback V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">GS</sub> /R reference is proposed to provide correlated current and voltage references for the oscillator. As a result, the oscillator frequency is solely determined by the resistor in the reference and the timing capacitor to meet the frequency tolerance specification. Meanwhile, to minimize the power consumption, a minimum-supply-voltage-constraint (MSVC) design criterion is proposed to minimize the required supply voltage. The inverted mirror feedback technique reduces the headroom requirement of the traditional V <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">GS </sub> /R to meet the MSVC. Measurement results show that the entire oscillator requires a minimum supply voltage of 0.8V in the prototype chip fabricated in CMOS 0.13mum technologies. The measured oscillation frequency is 1.52MHz with 400nA total current consumption. The chip area is 13400mum <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup>
3
Remotely powered addressable UHF RFID integrated system
J.-P. Curty, N. Joehl, Catherine Dehollain et al. · IEEE Journal of Solid-State Circuits · 2005 · 350 citations · Full text