Applications of magnetic sensors for low cost compass systems

Michael J. Caruso

2002 · 265 citations · 3 references

Concepts

TL;DR

Commercial airlines use expensive attitude and heading reference systems, while general aviation aircraft find such systems too costly for most pilots. The study proposes a heading determination method that accounts for pitch, roll, and vehicle magnetic properties. The method uses solid‑state magnetic sensors combined with a tilt sensor to create a low‑cost compass system that incorporates pitch and roll. The system delivers heading, pitch, and roll with better than one‑degree accuracy, but its outputs are influenced by acceleration and turns, a limitation addressed by the authors.

Abstract

A method for heading determination is described that will include the effects of pitch and roll as well as the magnetic properties of the vehicle. Using solid-state magnetic sensors and a tilt sensor, a low cost compass system can be realized. Commercial airlines today use attitude and heading reference systems that cost tens of thousands of dollars. For general aviation, or small private aircraft, this is too costly for most pilot's budget. The compass system described here provides heading, pitch and roll outputs accurate to one degree, or better. The shortfall of this low-cost approach is that the compass outputs are affected by acceleration and turns. A solution to this problem is also presented.

References

3