IEEE Journal of Solid-State Circuits · 2010 · 292 citations · 31 references
EngineeringElectrical EngineeringMicroelectronicsMicrowave EngineeringSemiconductor DevicesCmos Circuit DesignComplementary Metal-oxide-semiconductor TechnologyHigh-frequency Semiconductor DevicesMicrowave AmplifiersMicrowave Integrated CircuitsPower AmplifiersBandwidthCmos Microwave AmplifiersGainIsolationPower Amplifier DesignPower GainPower OutputSmall-signal Gain
A 60-GHz band, three-stage pseudo-differential power amplifier (PA) is implemented with input and output baluns on-chip. Each stage consists of a neutralized common-source amplifier pair. Neutralization mitigates the intrinsic gate-drain feedback of each transistor for increased power gain and reverse isolation. Shielded transformers couple the gain stages and allow low supply voltage operation. Fabricated in a 65-nm bulk CMOS process, the measured small-signal gain of the 0.13 × 0.41 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> PA is 16 dB at 60 GHz with 3-dB bandwidth more than 8.5 GHz, while consuming 50 mW from a 1-V supply. Reverse isolation is better than 42 dB from 55 to 65 GHz. Maximum saturated output power is 11.5 dBm with a peak PAE of 15.2% measured at 62 GHz; from 58 to 65 GHz, the measured PAE is above 10%.
31
Analog Circuit Design in Nanoscale CMOS Technologies
Lanny L. Lewyn, Trond Ytterdal, Carsten Wulff et al. · Proceedings of the IEEE · 2009 · 196 citations