Smart Materials and Structures · 2014 · 101 citations · 47 references
EngineeringMaterials EngineeringMechanical EngineeringActuatorsAerospace MaterialsRoboticsActuator DesignActuator MaterialsBioinspired Robot DesignDielectric Elastomer ActuationElastomeric PolymersSoft ActuatorsActuation MechanismsActuation StrainDielectric Elastomer ActuatorsDielectric Elastomer MaterialsDielectric ElastomersSpecific EnergySpecific Mechanical EnergyWing Flapping
Dielectric elastomer actuators (DEAs) are attractive for use to bio-inspired flapping-wing robots because they have high work density (specific energy) and can produce a large actuation strain. Although active membrane of dielectric elastomer is lightweight, the support structure that pre-tensions the elastomeric membrane is massive and it lowers the overall work density. If DEA was to be used successfully to drive the flapping-wing robots, its support structure must be as lightweight as possible. In this work, we designed, analyzed, and developed a lightweight shell using cross-ply laminate of carbon fibre reinforced polymer (CFRP) to pre-strain a rolled DEA. The CFRP shell was shown to weigh 24.3% of total mass for the whole DEA assembly while providing up to 35.0% axial pre-strain to a rolled DEA (BJB-5005 silicone rubber). This DEA assembly using the CFRP shell achieved 30.9% of the theoretical work density for BJB-TC5005 membrane at 33.5MV/m. In comparison, the spring rolls with a massive spring core were reported with overall work density merely 10-20% of the maximum value. Furthermore, this CFRP shell can amplify an axial DEA stroke into a larger transverse shell deformation. With these deformation characteristics, this CFRP shell and a rolled DEA were successfully integrated with an insect-inspired thoracic mechanism and they were shown feasible to drive it for flapping wing.
47
High-Speed Electrically Actuated Elastomers with Strain Greater Than 100%
Ron Pelrine, Roy Kornbluh, Qibing Pei et al. · Science · 2000 · 3.2K citations