Journal of the American Ceramic Society · 1989 · 25 citations · 10 references
Natural SciencesMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor MaterialsThin FilmsDopingOxide SemiconductorsSemiconductor Thin FilmsThin Film AnnealingThin Film Electrical PropertiesThin-film MaterialsAnnealingAnnealing EffectsAnnealing Temperature EffectsCrystalline StructureElectrical PropertiesGrain BoundariesResistivityTin-doped Indium Oxide
Indium tin oxide (ITO) films (0.3 μm thick), with a doping level of 28 mol% SnO 2 , were prepared by a radio frequency magnetron sputtering mehthod. The effects of postannealing on the microstructure and the electrical properties of the ITO films were investigated. The as‐sputtered film showed an amorphous structure, whereas the films annealed at 350° and 510°C exhibited crystalline structures with grain sizes of 0.12 and 0.14 μm, respectively. Examination by TEM showed that the postannealing treatment induced SnO 2 precipitates along the grain boundaries. The resistivity increased with increasing postannealing temperatures. The mobility of carriers appears to be responsible for the resistivity increase in these specimens. The mobility change is discussed in connection with the SnO 2 precipitates.
10
Transparent conductors—A status review
K. L. Chopra, S.S. Major, Dinesh K. Pandya · Thin Solid Films · 1983 · 2.7K citations
Natural Sciences, Electrical Engineering, Materials Science +14