Electrochemically deposited and etched membranes with precisely sized micropores for biological fluids microfiltration

Azrul Azlan Hamzah, Hafzaliza Erny Zainal Abidin, B.Y. Majlis, Mimiwaty Mohd Nor, Abrar Ismardi, Gandi Sugandi, Teck Yaw Tiong, Chang Fu Dee, Jumril Yunas

Journal of Micromechanics and Microengineering · 2013 · 27 citations · 26 references

Concepts

Abstract

This paper presents simple and economical, yet reliable techniques to fabricate a micro-fluidic filter for MEMS lab-on-chip (LoC) applications. The microporous filter is a crucial component in a MEMS LoC system. Microsized components and contaminants in biological fluids are selectively filtered using copper and silicon membranes with precisely controlled microsized pores. Two techniques were explored in microporous membrane fabrication, namely copper electroplating and electrochemical etching (ECE) of silicon. In the first technique, a copper membrane with evenly distributed micropores was fabricated by electroplating the copper layer on the silicon nitride membrane, which was later removed to leave the freestanding microporous membrane structure. The second approach involves the thinning of bulk silicon down to a few micrometers thick using KOH and etching the resulting silicon membrane in 5% HF by ECE to create micropores. Upon testing with nanoparticles of various sizes, it was observed that electroplated copper membrane passes nanoparticles up to 200 nm wide, while porous silicon membrane passes nanoparticles up to 380 nm in size. Due to process compatibility, simplicity, and low-cost fabrication, electroplated copper and porous silicon membranes enable synchronized microfilter fabrication and integration into the MEMS LoC system.

References

26