Applied Physics Letters · 2003 · 80 citations · 23 references
Natural SciencesMaterials EngineeringMaterials ScienceNanomaterialsNanotechnologySurface ScienceNanoelectronicsNanostructured Electronic MaterialsField EmissionNanodiamondsNanostructuringQuality Factor EnhancementReactive Ion EtchingThin Film Nanostructuring
A structuring method capable of producing uniform, large-area cone arrays of diamond films was developed. The technique employs bias-assisted reactive ion etching and is applicable to any structure of diamond films ranging from microcrystalline to nanocrystalline. Variation of the etching conditions enables control of the cone density, geometry, and height. Surface nanostructuring of cone arrays significantly improves the field emission properties of diamond films of all kinds. The turn on field is reduced to 6 and 10 V/μm for nanodiamond and microdiamond films, respectively, (compared to >25 V/μm for as deposited surfaces). Lower cone density yields better field electron emission (lower turn-on electrical field) due to the screening in high-density cone arrays. The field emission properties are determined by both the enhancement factor of the cone array and the emitting properties of the material. The field electron emission properties of nanodiamond arrays are better than cone arrays of single crystalline diamond with a similar cone density and cone geometry.
23
Physical properties of thin-film field emission cathodes with molybdenum cones
C.A. Spindt, I. Brodie, L. M. Humphrey et al. · Journal of Applied Physics · 1976 · 1.5K citations
Oriented Silicon Carbide Nanowires: Synthesis and Field Emission Properties
Zhengwei Pan, H.-L. Lai, Frederick Au et al. · Advanced Materials · 2000 · 470 citations
Natural Sciences, Materials Engineering, Materials Science +17