Heteroepitaxy of Corundum-Structured α-Ga<sub>2</sub>O<sub>3</sub> Thin Films on α-Al<sub>2</sub>O<sub>3</sub> Substrates by Ultrasonic Mist Chemical Vapor Deposition

Daisuke Shinohara, Shizυo Fujita

Japanese Journal of Applied Physics · 2008 · 516 citations · 23 references

Concepts

TL;DR

Ga₂O₃ thin films in the corundum α‑phase have been successfully epitaxially grown on sapphire substrates, overcoming the usual tendency of Ga₂O₃ to adopt the β‑gallia structure on such substrates. Mist‑CVD growth of α‑Ga₂O₃ on sapphire at 430–470 °C produces high‑quality films with 60‑arcsecond rocking‑curve FWHM, 1‑nm RMS roughness, a 5.3‑eV band gap, near‑UV/visible transparency, and suitability for oxide optical and electronic devices.

Abstract

Ga2O3 thin films of the α-phase, that is, the corundum structure (in the trigonal system), have been epitaxially obtained on sapphire (α-Al2O3) substrates, in contrast to the strong tendency of Ga2O3 to assume a heterogeneous crystal structure, that is, the β-gallia structure (in the monoclinic system) on sapphire. This result is advantageous for high-quality films and is due to the growth by mist chemical vapor deposition (CVD) at low temperatures of 430–470 °C. The α-Ga2O3 films have narrow full-widths at half maximum (FWHMs) in their X-ray diffraction rocking curves, for example, about 60 arcsec. The root mean square (RMS) roughness of the surface was as small as 1 nm. The optical band gap energy obtained was 5.3 eV, and the films were almost completely transparent in the near-ultraviolet and visible regions. The epitaxial growth of α-Ga2O3 films on sapphire is beneficial for the fabrication of oxide optical and electronic devices.

References

23