Float-polishing process and analysis of float-polished quartz

Schubert Soãres, David R. Baselt, James P. Black, K. C. Jungling, W. K. Stowell

Applied Optics · 1994 · 46 citations · 8 references

Concepts

Abstract

A fluid-mechanical model is developed for the float-polishing process. In this model laminar flow between the sample and the lap results in pressure gradients at the grooves that support the sample on a fluid layer. The laminar fluid motion also produces supersmooth, damage-free surfaces. Quartz substrates for applications in high-stress environments were float polished, and their surfaces were analyzed by optical scatterometry, photoacoustic spectroscopy, and atomic force microscopy. The removal of 100 µm of material by a lapping-polishing process, with final float polishing, left low levels of subsurface damage, with a surface roughness of approximately 0.2-nm rms.

References

8