Applied Physics Letters · 2008 · 96 citations · 14 references
EngineeringElectrical EngineeringMaterials ScienceOptoelectronicsSemiconductor DevicesSemiconductor MaterialsLaser DiodesQuantum DotsSemiconductor Device MaterialsSemiconductor HeterostructuresSemiconductor LasersSemiconductor PhysicsDiode Laser Threshold CurrentPhotolithographyQuantum Dot DevicesQuantum Dot Laser DiodesQuantum Dot LasersQuantum Dot MaterialsSemiconductor Laser FabricationSemiconductor Quantum Dots
We used a strain compensation technique to fabricate highly stacked InAs quantum-dot (QD) structures on InP(311)B substrates. We stacked 60 layers of InAs QDs without degrading the crystal quality and produced a structure with a total QD density of 4.73×1012∕cm2. We then fabricated a broad area laser diode with a 30-layer stack of InAs QDs using conventional photolithography. The laser diode showed ground state lasing at 1.58μm with a threshold current of 162mA. The achievement of ground state lasing is due to the increase in QD density, which is a result of using the strain compensation technique.
14
Simultaneous two-state lasing in quantum-dot lasers
A. Markus, Jiangxi Chen, Cyril Paranthoën et al. · Applied Physics Letters · 2003 · 283 citations · Full text
Natural Sciences, Physics, Optics +14
Mitsuru Sugawara, Nobuaki Hatori, M. Ishida et al. · Journal of Physics D Applied Physics · 2005 · 231 citations
Low chirp observed in directly modulated quantum dot lasers
Hirohisa Saito, Kenichi Nishi, A. Kamei et al. · IEEE Photonics Technology Letters · 2000 · 177 citations