Journal of Applied Polymer Science · 1971 · 12 citations · 10 references
Natural SciencesChemical EngineeringChemistryPolymer ChemistryPolymer EngineeringPolymer MaterialsPolymer AnalysisPolymer CharacterizationPolymer Physical ChemistryPolymer ProcessingPolymer StructurePolymerization ChemistryCopolymer Composition AnalysisCopolymer Sequence DistributionPolymer Copolymer Composition AnalysisPolymer Sequence AnalysisPolymer-monomer RatioPyrolysisPyrolysis BehaviorPyrolysis Gas Chromatography Mass Spectrometry
Abstract An investigation of the behavior of poly(methyl methacrylate co ethyl acrylate) with a commercially available filament‐type pyrolysis unit and gas chromatogaph was conducted. It has been hypothesized that the quantity of ethyl acrylate monomer produced under the conditions of the experiment is dependent upon the number of ethyl acrylate–methyl methacrylate bonds contained in the copolymer. These observations were made possible by a standardized samples‐handling technique in which a uniformsize disk was pyrolyzed at a maximum pyrolysis temperature of 600°C. This enabled reproducible pyrolysis gas chromatograms to be obtained and permitted pyrolysis products of copolymers containing different ratios of ethyl acrylate and methyl methacrylate to be compared. An examination of sequence distribution data, obtained with the aid of a sequence distribution program for copolymers, showed sufficient agreement with the pyrolysis data to support the hypothesis. It has been demonstrated that pyrolysis gas chromatography may be applied to experimentally determine the sequence distribution of copolymers.
10
Analysis of Methyl Methacrylate Copolymers by Gas Chromatography
John Strassburger, G. Bräuer, Max Tryon et al. · Analytical Chemistry · 1960 · 93 citations