Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · 2000 · 62 citations · 24 references
Natural SciencesMaterials EngineeringMaterials ScienceMetallic MaterialsSurface EngineeringSurface ScienceAlloysCoatingsMetalsSurface CoatingsSurface PhysicsApparent Activation EnergyCoating DefectsDefect DiffusionIn Situ Phase EvolutionMicrostructural Evolution During AnnealingTemperature Dependence Of Defect PopulationsThermal StabilityX-ray Diffraction Analysis
The thermal stability of arc-evaporated Cr–N coatings has been investigated as a function of incident ion energy via tempering experiments. Coatings were grown onto high-speed steel substrates at two bias voltages, 50 and 300 V, and examined using x-ray diffraction, transmission electron microscopy, and Auger electron spectroscopy. A significant reduction in the as-deposited lattice defect density, accompanied by the formation of equiaxed grains, was observed after tempering the coatings slightly above the deposition temperatures. Phase evolution was also observed during tempering, characterized by β-Cr2N phase formation above a time-dependent temperature, which suggests that a nonequilibrium excess of CrN1−x(x≈0.17) was formed during growth. The apparent activation energy, Q, for defect relaxation was determined to be approximately 2.7±0.3 eV in the 50 V coating, which is in good agreement with published values for bulk diffusion of N in CrN. In the 300 V coating, however, Q was found to increase from 1.7±0.3 to 3.1±0.3 eV with decreasing defect concentration. These results are discussed in terms of different defect populations formed as a function of incident ion energy during deposition, and corresponding defect-mediated diffusion.
24
John A. Thornton · Annual Review of Materials Science · 1977 · 2.1K citations
Natural Sciences, Materials Engineering, Materials Science +12
Ion induced stress generation in arc-evaporated TiN films
H. Ljungcrantz, Lars Hultman, J.‐E. Sundgren et al. · Journal of Applied Physics · 1995 · 155 citations
Natural Sciences, Materials Engineering, Materials Science +17