Journal of Applied Physics · 2003 · 69 citations · 6 references
Natural SciencesMaterials EngineeringMaterials ScienceInterface ScienceMagnetic MaterialsMaterials ChemistryFerromagnetismMagnetic AnisotropyMagnetic OxidesSurface MagnetismSurface OxidationThin Film Magnetic PropertiesAnisotropyHall EffectHall Effect MeasurementsMagnetic Tunnel JunctionsOxidationOxidation BarriersPerpendicular Magnetic AnisotropyTunnel Junctions
Pt/Co/M sandwiches (M=Al, Ta, Cr) were prepared by sputtering. The M capping layer was oxidized either by natural oxidation in air or by exposure to an oxygen plasma. By measuring the extraordinary Hall effect in these systems, we observed that the magnetic anisotropy of the Co electrode is extremely sensitive to the degree of oxidation of the capping layer. In particular, when M=Al, the magnetic anisotropy is found in plane when the AlOx layer is under or overoxidized whereas it is out of plane when this oxide layer is stochiometric alumina. The conditions of oxidation which give the perpendicular anisotropy in Pt/Co/AlOx are found to be the same than those which lead to a maximum of specular reflection at Co/AlOx interface in Co/Ru/Co/Cu/Co/AlOx synthetic spin-valves. This crossover of anisotropy therefore provides a very useful way for controlling the oxidation of tunnel barriers. Furthermore, this phenomenon can be used to study the aging of naturally oxidized tunnel junctions exposed to air, and it is also observed with other capping materials such as Ta or Cr.
6
Progress and outlook for MRAM technology
S. Tehrani, J. M. Slaughter, E. Chen et al. · IEEE Transactions on Magnetics · 1999 · 437 citations
Engineering, Computer Engineering, Electrical Engineering +9
S. Monso, B. Rodmacq, S. Auffret et al. · Applied Physics Letters · 2002 · 195 citations
Natural Sciences, Materials Engineering, Materials Science +17