Journal of Applied Physics · 2003 · 33 citations · 9 references
Natural SciencesMaterials EngineeringMaterials ScienceCrystal StructureSolid State PhysicsThin FilmsAmorphous MaterialsAmorphous SolidsNucleationOxide SemiconductorsThin Film AnnealingThin-film MaterialsAnnealing EffectsAnnealing Temperature EffectsCrystallizationIndium Tin Oxide Thin FilmsMicrostructural AlterationNanocrystal Growth MechanismsOxygen VacanciesSputtering
Hydrogenated amorphous indium–tin–oxide (ITO) films were prepared by a sputtering method at room temperature with H2O addition. The initial stage of thermal crystallization of the amorphous films was investigated after annealing at 150 °C, just below the crystallization temperature. With increasing H2O addition, the growth of crystallites dispersed in the amorphous matrix was suppressed, while the nucleation of crystallites was sharply enhanced. The amount of bonded hydrogen increased and that of oxygen vacancies decreased at the same time, with introducing inhomogeneites in the amorphous matrix. The effect of these microstructural changes on the nucleation and growth process of crystallites embedded in the amorphous solids was discussed based on these experimental results taking into account a recently proposed theoretical prediction to describe the crystallization of disordered solids.
9
Optical and electrical properties of doped In2O3 films
H. Köstlin, R. Jost, W. Lems · physica status solidi (a) · 1975 · 289 citations
S. Ishibashi, Yoshiyuki Higuchi, Yukihide Ota et al. · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · 1990 · 166 citations
Natural Sciences, Materials Engineering, Materials Science +17
J. R. Bellingham, W. A. Phillips, C. J. Adkins · Thin Solid Films · 1991 · 62 citations