Finite Element Analysis Couples Casing and Cement Designs for HP/HT Wells in East Texas

James Heathman, Florian Beck

2006 · 34 citations · 10 references

Concepts

Abstract

Abstract Wells drilled into the deep Bossier formations of the east Texas Hilltop Field encounter low-permeability, gas-bearing formations at over 15,000-psi pressure and 400°F temperatures. The wells require high-pressure fracture stimulations and extreme production drawdown to produce at economic rates. Wellbore temperature variations occurring between stimulation and production operations are extreme. The gases in these formations are also highly corrosive. Two of the first three wells completed in this area failed from casing collapse during completion operations or within the first few weeks of production. Finite element analysis (FEA) modeling coupled with log-derived formation properties confirmed that the extreme stresses applied to these wells rendered previous casings and cement sheaths "under-designed." Using an approach that combined formation, casing, and cement mechanical properties into a system, the wells were redesigned. Detailed thermal and mechanical modeling of all wellbore operations resulted in redesigned casings and a cement sheath more applicable to the extreme loads being exerted. Minor changes were also implemented to the job placement procedures to lessen the loads placed on the cement sheath. High-strength, corrosion-resistant casings and specialty cement designs were successfully used on the first two wells. Since those wells have been on production, additional wells have been drilled and completed using incrementally-simplified designs. All the wells have withstood multiple stimulations at treating pressures exceeding 14,000 psi, production test drawdowns at the perforations of over 13,000 psi, and temperature changes estimated at more than 300°F. The wells have withstood these extreme pressure and temperature changes without failure of either the casing or cement sheath. The cement and casing designs employed have proven competent for the high-pressure, high-temperature (HPHT) conditions encountered. The successful design methodology couples well-specific casing and cement designs into a system capable of surviving the extreme pressure and temperature conditions imparted on the well during stimulation and production operations of deep, low-permeability HPHT gas sands.

References

10