High-density mixed signal RF front-end electronics for T-R modules

Andrea Bentini, Walter Ciccognani, Mirko Palomba, Diego Palombini, Ernesto Limiti

2012 · 23 citations · 13 references

Concepts

Abstract

In this contribution, several Multi-Functional Chips featuring different functionalities and integration levels are presented. A X-Band Core-Chip integrating a 6-bit attenuator, a 6-bit phase shifter, a T/R switch and a digital serial-to-parallel converter has been fabricated with 0.18 μm OMMIC ED02AH process. The MMIC exhibits 6 dB and 8 dB average insertion gain for transmit and receive mode respectively, full 360° phase coverage with 5.6° phase steps and 31.5 dB attenuation dynamic range with 0.5 dB amplitude resolution in less than 16 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> . Two C-Band Multi-Functional Chips, one consisting of a bidirectional 6-bit phase shifter with on-board digital controls and the other integrating a 6-bit phase shifter, a buffer amplifier and a 5-bit attenuator have been fabricated with the 0.4 μm E/D GaAs process developed by SELEX Sistemi Integrati. The former exhibits full 360 degree phase coverage with 5.6° phase resolution in less than 18 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> . The latter is an unidirectional MMIC featuring 8 dB average gain, full 360 degree phase coverage with 5.6° phase steps and 31 dB attenuation range with 1 dB amplitude resolution in less than 26 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> .

References

13