Progress in Photovoltaics Research and Applications · 2006 · 55 citations · 6 references
EngineeringElectrical EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsDevice CharacterizationDevice ModelingPhotovoltaic DevicesSemiconductor InterfacesSemiconductor SurfacesSolar CellsOhmic ContactsOhmic MaterialsPassivationPassivation LayersPassivation Of OxidesRecombination LossesRecombination MechanismsSurface Recombination
Abstract This paper presents the application of the analytical model for locally contacted rear sides recently published by Fischer to the determination of recombination losses of solar cells with fixed metallization fraction, but varying contact pitch. After the successful experimental validation of the model on oxide‐passivated solar cells with ohmic contacts, the model was used for a detailed investigation of rear sides prepared by the laser‐fired contacts (LFC) method. In this way the surface recombination velocity (SRV) at the very contact areas was extracted for a broad base doping range. The determined parameterization allows the calculation of the SRV of any LFC rear side concerning base doping and contact pitch. The excellent passivation quality of the alnealed oxide with LFC contacts is shown: on 1 (100) Ω cm FZ an effective SRV of only 35 (4·3) cm/s could be measured with 1000 µm contact pitch. Copyright © 2006 John Wiley & Sons, Ltd.
6
Analytical model for the optimization of locally contacted solar cells
Heiko Plagwitz, Martin Schaper, Jan Schmidt et al. · 2005 · 14 citations