Effects of pulsed sputtering frequency on the uniformity of Al:ZnO’s transparent conductive oxide properties for solar cell applications

Won‐Kyun Yang, Junghoon Joo

Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · 2009 · 11 citations · 20 references

Concepts

Abstract

Bipolar pulsed magnetron sputtering is used to deposit Al doped ZnO (AZO) on a glass substrate for a transparent conducting oxide in a solar cell structure. A 5×25in.2 AZO target was sputtered by 50–250kHz bipolar pulsed dc power supply to deposit a 400×400mm2 area by swinging back and forth. Sheet resistance, surface morphology, and optical transmittance were measured at different positions on 16 witness samples (small glass slides) to evaluate uniformity. In the thickness of 800nm, the average value of sheet resistance was 30Ω∕◻ and the average resistivity was 2.1×10−3Ωcm. Transmittance was 50%–80% over the visible range. The nonuniformities of thickness, transmittance, and resistivity in the 400×400mm2 area were 5.8%, 0.8%, and within 9.5%, respectively.

References

20