Etch-stop characteristics of Sc2O3 and HfO2 films for multilayer dielectric grating applications

Jerald A. Britten, H. T. Nguyen, S. Falabella, B. Shore, M. D. Perry, Daniel H. Raguin

Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · 1996 · 28 citations · 0 references

Concepts

Abstract

High-efficiency, high laser-damage threshold reflection gratings can be made by etching a grating structure into the top layer of a multilayer high-reflectivity stack. Spatial efficiency and wave-front uniformity can be maximized by taking advantage of the etch-stop properties of the layer underneath the top layer to be etched. The etch-stop layer must have a high optical damage resistance, which places severe restrictions on available materials. The etch characteristics of HfO2 and Sc2O3, two materials commonly used in high laser-damage optical coatings, have been evaluated. The etch rate selectivities of e-beam evaporated SiO2/HfO2/Sc2O3 thin films in a reactive ion etching system optimized for SiO2 etching are approximately 100/10/1. Gratings etched to a HfO2 etch-stop layer suffered from deposition of fluorinated Hf compounds on the SiO2 grating sidewalls, but sidewalls were clean when Sc2O3 was used as the etch-stop layer.