TiN coatings generated with a pulsed plasma arc

H. Bruzzone, H. Kelly, Adriana Márquez, Diego G. Lamas, Andrea Ansaldi, Claudia Oviedo

Plasma Sources Science and Technology · 1996 · 19 citations · 11 references

Concepts

Abstract

A systematic study of TiN coatings produced with a low-energy pulsed plasma arc (500 A peak current, 35 ms half-amplitude-full-width duration) is presented. The background pressure was varied in the range 0.6 - 10 mbar. Several diagnostic techniques were employed to study the coatings: Scotch tape test, weighting, scanning electron microscopy (SEM), x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), and Vickers microhardness. The results show that two different microstructures of the coatings can be obtained by changing the operating pressure value: a low-pressure regime where the coating presents high porosity, with agglomerates of diameter in the range 10 - 60 m; and a high-pressure regime, for which the coatings are more uniform and dense, with agglomerates of less than 3 m size.

References

11