Application of Flow-Thru Composite Frac Plugs in Tight-Gas Sand Completions

Abstract

Abstract Several major developmental programs in the Rocky Mountain region of the United States are in fields where zones of several hundred to several thousand feet of stacked, tight (<0.05 md) lenticular gas sands exist. In order to be productive, these wells require multiple fracture treatments over the pay interval. Since field development has been ongoing, the drilling programs are extending into more marginal production areas. Infill programs are downsizing spacing, and also, successful refracturing programs are being conducted in some fields. Before 1998, traditional methods were being used to isolate fracture treatments. These methods usually required killing the well between fracture treatments or during cleanout operations. Unfortunately, field studies have determined that the traditional isolation methods have negatively impacted well productivity. In view of the costs involved and the lower productivity experienced with the new drilling programs, it became apparent that either well costs had to be reduced or well productivity had to be improved! This paper will discuss the application of flow-thru composite frac plugs (FTCFP) and how they were capable of addressing the current needs to reduce operational costs and improve productivity. These plugs can be used as an alternative to traditional isolation methods, or induced stress diversion. Through June 2002, there have been over 3,200 FTCFPs run in the Rocky Mountain region. The benefits gained from FTCFP usage are derived from the following: Well drill-out costs are reducedPositive isolation is allowedAll zones can be produced during completion. Their use has now become a "best practice" in stacked-pay completions.