Measurement Science and Technology · 2012 · 16 citations · 11 references
EngineeringManufacturing EngineeringDiagnostic ImagingMetrologyRadiation MeasurementComputed TomographyRadiographic ImagingX-ray Data AnalysisAccuracyComputed Tomography-based MeasurementQuality AssessmentRoot-mean-square DeviationX-ray Computed Tomography
This paper presents an approach to assess the quality of the data extracted with computed tomography (CT) measuring systems to perform geometrical evaluations. The approach consists in analyzing the error features introduced by the CT measuring system during the extraction operation. The analysis of the features is performed qualitatively (using graphical analysis tools) and/or quantitatively (by means of the root-mean-square deviation parameter of the error features). The approach was used to analyze four sets of measurements performed with an industrial x-ray cone beam CT measuring system. Three test parts were used in the experiments: a high accuracy manufacturing multi-wave standard, a calibrated step cylinder and a calibrated production part. The results demonstrate the usefulness of the approach to gain knowledge on CT measuring processes and improve the quality of CT geometrical evaluations. Advantages and limitations of the approach are discussed.
11
L.A. Feldkamp, L. C. Davis, J. W. Kress · Journal of the Optical Society of America A · 1984 · 6.2K citations
Principles of Computerized Tomographic Imaging
Avinash C. Kak, Malcolm Slaney, Ge Wang · Medical Physics · 2002 · 1.9K citations
J.W. Mark · Proceedings of the IEEE · 1975 · 1.6K citations
Computed tomography for dimensional metrology
Jean‐Pierre Kruth, Markus Bartscher, Simone Carmignato et al. · CIRP Annals · 2011 · 672 citations
Engineering, Manufacturing Engineering, Biomedical Imaging +11
Multisensor data fusion in dimensional metrology
Albert Weckenmann, Xiangqian Jiang, Klaus‐Dieter Sommer et al. · CIRP Annals · 2009 · 267 citations
Engineering, Manufacturing Engineering, Mechatronics Engineering +14