Mass and Electron Balance for the Oxidation of Silicon during the Wet Chemical Etching in HF/HNO<sub>3</sub> Mixtures

J. Acker, Anja Rietig, Marco Steinert, Volker Hoffmann

The Journal of Physical Chemistry C · 2012 · 43 citations · 27 references

Concepts

Abstract

The stoichiometry of the wet-chemical etching of silicon in concentrated HF/HNO 3 mixtures has been studied. By quantifying the major reaction products in solution, the established model that 3 mol of Si are oxidized by 4 mol of HNO 3 to yield 4 mol of NO could not be confirmed. In HNO 3 -rich HF/HNO 3 mixtures, approximately 1.1 mol of HNO 3 are required to oxidize 1 mol of Si. Excess HNO 3 leads to massive accumulation of N(III) species in the etchants and massive formation of nitrous oxides due to incomplete reduction of the HNO 3 . An excess of HNO 3 leads to higher consumption and poorer utilization indicated by the massive accumulation of N(III) species in the etchants. In HF-rich mixtures, only 0.9 mol of HNO 3 are needed to oxidize 1 mol of Si yielding a lower accumulation of N(III) species and a higher utilization of the HNO 3 . Two parallel pathways contribute to the oxidation of silicon in such solutions: (i) via the oxidation by HNO 3 and reactive intermediates generated by the reduction of HNO 3 and (ii) via the formation of hydrogen. A comprehensive treatment covering alkaline etching, electrochemical etching in HF media, and etching in concentrated HF/HNO 3 mixtures is proposed based on the reactivity of the hydrogen terminated silicon surface against the applied oxidizing agent.

References

27