A CMOS Subbandgap Reference Circuit With 1-V Power Supply Voltage

Abstract

A CMOS subbandgap reference circuit with 1-V supply voltage is described. To obtain subbandgap reference voltages with a 1-V supply voltage, threshold voltage reduction and subthreshold operation techniques are used. Large /spl Delta/V/sub BE/ (100 mV) as well as a 90-dB operational amplifier are used to circumvent the amplifier offset. A power-on-reset (POR) circuit is used as startup. This circuit has been implemented using a standard 0.5-/spl mu/m CMOS process, and its size is 940 /spl mu/m/spl times/1160/spl mu/m. The temperature coefficient is 17 ppm from -40/spl deg/C to 125/spl deg/C after resistor trimming and the minimum power supply voltage is 0.95 V. The measured total current consumption is below 10 /spl mu/A and the measured output voltage is 0.631 V at room temperature.