International Polymer Processing · 2003 · 10 citations · 1 references
EngineeringMaterials EngineeringMaterials ScienceCeramicsFinite Element AnalysisMechanical Behavior Of MaterialsExtrusion ProcessingFlow BehaviorMaterial ExtrusionNewtonian FlowPolymer ExtrusionExtrusion FlowNon-newtonian EffectsSingle-screw ExtrusionSlippageSuspensionsWall Shear StressWall SlipWall Slip Effects
Abstract So far it has been assumed that when describing the flow process in single-screw extruder, the melt will be wall-adhering. Using certain process conditions, however, some materials such as PVCs, high-molecular PEs, elastomers, polymer suspensions, ceramic materials and food products become wall-slipping [1 to 4]. During simulation of the flow process using the Finite Element Method (FEM), the boundary condition of “wall-adhering” was substituted for “wall-slipping”. The numeric results refer to one-dimensional, non-Newtonian, isothermal flow processes and have been evaluated accordingly. Since the wall-slipping properties are dependent on critical shear stress, the influence of non-Newtonian behaviour on wall shear stress is illustrated by investigating the barrel and screw root surface. Conclusions with regard to wall-slipping properties may be drawn from the resulting upper and lower limits. The effect of wall slippage on pressure/throughput behaviour is examined along with the various velocity profiles, resulting from different compression ratios, dimensionless critical shear stress, material-related constants and screw configuration.
1
Principles of polymer processing
Choice Reviews Online · 2007 · 1.2K citations
Natural Sciences, Materials Engineering, Materials Science +17