Journal of Applied Physics · 2011 · 33 citations · 12 references
EngineeringMaterials EngineeringMaterials ScienceMagnetic MaterialsNanotechnologySensorsElectrical SensorsMagnetic CharacterizationMagnetic SensorsMems SensorsNanosensorsSpintronicsField SensitivityLinearizationMagnetic Field SensingMagnetic Field SensorsMagnetoresistive SensorsSensitivityTunnel MagnetoresistanceTunnel Magnetoresistance Sensors
Optimized single magnetic bead detection requires magnetic sensors with an improved field detection limit and a sensor area matching the bead cross section (micron size spatial resolution). This work shows that square micron sized tunnel magnetoresistance sensors can be fabricated with integrated longitudinal permanent magnet (PM) biasing that show a linearized field response and low noise. PMs (Co66Cr16Pt18) were integrated in the top lead of an AlOx based magnetic tunnel junction sensor for transfer curve linearization. Sensors patterned with dimensions down to 3 × 3 μm2 present field detection limits of 6 nT/Hz0.5 and 3 nT/Hz0.5 at 10 kHz and 500 kHz, respectively, corresponding to a field sensitivity of 1.8% per mT (linear field detection range ΔB = −8 mT + 8 mT) and αH = 3.9 ± 0.3 × 10−10 μm2 (RxA = 1.9 kΩ μm2).
12
1/ƒ noise is no surface effect
F.N. Hooge · Physics Letters A · 1969 · 1.1K citations
Low-Frequency Magnetic Noise in Micron-Scale Magnetic Tunnel Junctions
Snorri Ingvarsson, Gang Xiao, S. Parkin et al. · Physical Review Letters · 2000 · 144 citations
Femtomolar limit of detection with a magnetoresistive biochip
V. C. Martins, Filipe A. Cardoso, J. Germano et al. · Biosensors and Bioelectronics · 2009 · 114 citations