Surface and Interface Analysis · 1994 · 12 citations · 12 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationSurface ScienceThin FilmsAluminum OxidesMetal OxidesMetalsThin-film DepositionThin-film MaterialsX-ray Photoelectron SpectroscopyAlumina Thin FilmsAmorphous Aluminum OxidesAmorphous OxidesDeposition RateDeposition Rate EffectsElectron Probe MicroanalysisMicroanalysisThin Oxide Films
Abstract The parameters controlling reactively deposited aluminium oxide films on Au and polycarbonate substrates have been investigated under typical PVD conditions of varying O 2 flux and deposition rate of thicknesses up to 150 nm. Chemical and physical characterization have been carried out by the use of x‐ray photoelectron spectroscopy (XPS) combined either with sputter profiling or by variation of the emission angle (ARXPS), electron probe microanalysis (EPMA), atomic force microscopy (AFM) and by transmission electron microscopy (TEM). Correlation between XPS, EPMA, AFM and TEM points to island formation during co‐deposition of crystalline metallic Al and amorphous oxide areas if the O 2 flux is insufficient. For high O 2 fluxes, completely amorphous Al 2 O 3 films are found. No intermediate phase between Al metal and Al 2 O 3 was detected.
12