Crystallization of Sol–Gel‐Derived Barium Strontium Titanate Thin Films

Abstract

Microstructural development of thin‐film barium strontium titanate (Ba x Sr 1– x TiO 3 ) as a function of strontium concentration and thermal treatment were studied, using transmission electron microscopy (TEM) and X‐ray diffractometry (XRD). Thin films, ∼250 nm thick, were spin‐coated onto Pt/Ti/SiO 2 /Si substrates, using methoxypropoxide alkoxide precursors, and crystallized by heat‐treating at 700°C. All films had the cubic perovskite structure, and their lattice parameters varied linearly with strontium content. Films with higher strontium concentrations had a larger average grain size. In situ TEM heating experiments, combined with differential thermal analysis/thermogravimetric analysis results, suggest that the gel films crystallize as an intermediate carbonate phase, Ba x Sr 1– x TiO 2 CO 3 (with a solid solution range from x = 1 to x = 0). Before decomposition at 600°C, this carbonate phase inhibits the formation of the desired perovskite phase.