Direct Torque Control of Permanent Magnet Synchronous Motor With Reduced Torque Ripple and Commutation Frequency

Abstract

In conventional direct torque controlled (DTC) permanent magnet synchronous motor drive, there is usually undesired torque and flux ripple. The existing literature have proposed some methods to reduce torque and flux ripple by optimizing the duty ratio of the active vector. However, these methods are usually complicated and parameter dependent. This paper first compares the performances of three duty determination methods in detail and then proposes a very simple but effective method to obtain the duty ratio. The novel method is superior to the existing methods in terms of simplicity and robustness. By appropriately arranging the sequence of the vectors, the commutation frequency is reduced effectively without performance degradation. To further improve the performance of system, a low-pass filter-based voltage model with compensations of amplitude and phase is employed to acquire accurate stator flux estimation. The proposed scheme is able to reduce the torque and flux ripple significantly while maintaining the simplicity and robustness of conventional DTC at the most. Simulations and presented experimental results validate the effectiveness of the proposed schemes in this paper.