Journal of Vacuum Science and Technology · 1979 · 47 citations · 0 references
Natural SciencesMaterials EngineeringMaterials ScienceSemiconductor MaterialsSurface ScienceThin FilmsEpitaxial GrowthSemiconductor Crystal GrowthSemiconductor PhysicsSemiconductor SurfacesSilicon MaterialsSurface PhysicsElectron Impact IonizationEpitaxial Film GrowthEpitaxial MaterialsEpitaxial Thin-film GrowthMolecular Beam ExperimentsSilicon EpitaxySurface GrowthVacuum Deposition
The role of simultaneous measurements of the chemical composition of a surface by AES, surface crystalline structure by RHEED, and released species by QMS are presented. A molecular beam of Si is effused from a partially ionized vapor deposition (PIVD) source consisting of a Kundsen cell and an electron-impact-type ionization chamber. The 7×7 structure of a Si(111) substrate at 1100 K changes into a broad 1×1 structure after vacuum deposition (VD) of 15 nm of Si while the epitaxial temperature can be lowered to 620 K (PIVD) in a 0.5% ionized atomic vapor with a typical deposition rate and acceleration energy of 0.3 nm/min and 100 eV, respectively. Epitaxial growth of Si on sapphire (11̄02) can be observed at 850 (VD) and at 700 K(PIVD), with a 1% ionized atomic vapor. The Auger spectra during deposition at 870 K remarkably shows that O and Al are reacted with Si on the film.