Journal of Adhesion Science and Technology · 1997 · 46 citations · 4 references
Natural SciencesMaterials EngineeringMaterials ScienceInterface ScienceSurface ChemistrySurface ScienceAdsorption At InterfacesCoatingsElectroless PlatingNanostructured SurfacesSurface AdsorptionSurface ModificationAlkali TreatmentCopper Electroless PlatingElectroless DepositionIon AdsorptionMetal AdsorptionSubstrate Surface FunctionalizationSubstrate Surface PreparationTransition Region Interface
The composition and microstructure of the interface in the copper-polyimide (PI) system formed in the process of electroless copper plating from solutions onto a PI film surface activated by tin and palladium compounds have been studied. It was found that the transition region in the near surface of the PI film layer was 20-30 nm in thickness and consisted of PI globules, copper and palladium particles, oxides of these metals, and Sn(II) and Sn(IV) oxo- and hydroxo-compounds. This region was formed as a result of metal ion adsorption and diffusion into the swelled PI layer, resulting in PI globule junctions which serve as capillaries. These processes were accompanied by the formation of C-O-Me and Me-N bonds due to ion exchange or donor-acceptor interaction of metal ions with carboxyl or amido groups generated during PI etching in alkali solutions. The formation of fine tin hydroxo-compounds and copper and palladium particles of nanometre sizes which are present on the whole substrate surface accessible to solutions of concentration up to 1000 μm-2 or higher plays an important role in providing strong (700 N/m) copper-to-polyimide adhesion.
4