Evaluation of Special Enzymes as a Means To Remove Formation Damage Induced by Drill-in Fluids in Horizontal Gas Wells in Tight Reservoirs

Mohammad Aquil Siddiqui, H. A. Nasr‐El‐Din

SPE Production & Facilities · 2005 · 16 citations · 12 references

Concepts

Abstract

Summary Drill-in fluids contain biopolymers such as xanthan gum, cellulose, and/or starch, along with bridging agents like sized calcium carbonate particles. These polymers are used to enhance the carrying capacity of the mud and to form a filter cake to minimize leakoff of the drilling fluids into the formation. Proper removal of drilling-mud filter cake is essential to minimize formation damage. The damage becomes more intense in tight formations, especially in horizontal gas wells in which the drawdown is not high enough to dislodge the filter cake. Another source of damage is the mud filtrate where fines migration and water blockage can occur in tight formations, especially in sandstone reservoirs. A thorough laboratory investigation of formation damage induced by drill-in fluids (water-based) was conducted. A mini-flow loop was used to assess formation damage induced by polymers present in the drill-in fluid. Various cleaning fluids were examined and their effectiveness in removing the filter cake was determined. These fluids included acidic brines, surfactants, mutual solvents, specific enzymes, and combinations of these fluids. The retained permeability of reservoir cores was determined for each cleaning system. This paper presents results obtained from the laboratory and recommendations made to remove drilling-mud filter cake from horizontal gas wells in a deep sandstone-gas reservoir.

References

12