MOD approach for the growth of epitaxial CeO<sub>2</sub>buffer layers on biaxially textured Ni–W substrates for YBCO coated conductors

M.S. Bhuiyan, M. Paranthaman, S. Sathyamurthy, Tolga Aytuğ, Sang Yull Kang, D F Lee, A. Goyal, E. Andrew Payzant, K. Saláma

Superconductor Science and Technology · 2003 · 126 citations · 13 references

Concepts

Abstract

We have grown epitaxial CeO2 buffer layers on biaxially textured Ni–W substrates for YBCO coated conductors using a newly developed metal organic decomposition (MOD) approach. Precursor solution of 0.25 M concentration was spin coated on short samples of Ni–3 at%W (Ni–W) substrates and heat-treated at 1100 °C in a gas mixture of Ar–4%H2 for 15 min. Detailed x-ray studies indicate that CeO2 films have good out-of-plane and in-plane textures with full-width-half-maximum values of 5.8° and 7.5°, respectively. High temperature in situ XRD studies show that the nucleation of CeO2 films starts at 600 °C and the growth completes within 5 min when heated at 1100 °C. SEM and AFM investigations of CeO2 films reveal a fairly dense microstructure without cracks and porosity. Highly textured YSZ barrier layers and CeO2 cap layers were deposited on MOD CeO2-buffered Ni–W substrates using rf-magnetron sputtering. Pulsed laser deposition (PLD) was used to grow YBCO films on these substrates. A critical current, Jc, of about 1.5 MA cm−2 at 77 K and self-field was obtained on YBCO (PLD)/CeO2 (sputtered)/YSZ (sputtered)/CeO2 (spin-coated)/Ni–W.

References

13