Journal of Microelectromechanical Systems · 2002 · 229 citations · 19 references
EngineeringBioengineeringMaterials EngineeringBiomaterialsMicroelectromechanical SystemsMicrofabricationGelsHydrogelsMicrofluidic Device FabricationMicrofluidic DevicesMicrofluidic SystemsMicrofluidicsFabricationHydrogel MaterialsLarge-displacement ActuationMicrofluidic ValvesMicrovalvesPhotopolymerizationPressure DropStimuli-responsive Hydrogels
Several microvalves utilizing stimuli-responsive hydrogel materials have been developed. The hydrogel components are fabricated inside microchannels using a liquid phase polymerization process. In-channel processing greatly simplifies device construction, assembly, and operation since the functional components are fabricated in situ and can perform both sensing and actuation functions. Two in situ photopolymerization techniques, "laminar stream mode" and "mask mode," have been explored. Three two-dimensional (2-D) valves were fabricated and tested (response time, pressure drop, maximum differential pressure). In addition, a hydrogel/PDMS three-dimensional (3-D) hybrid valve that physically separates the sensing and regulated streams was demonstrated. Analytical modeling was performed on the 3-D valve. Hydrogel-based microvalves have a number of advantages over conventional microvalves, including relatively simple fabrication, no external power requirement, no integrated electronics, large displacement (185 /spl mu/m), and large force generation (22 mN).
19
Collapse of Gels in an Electric Field
Toyoichi Tanaka, Izumi Nishio, Shao-Tang Sun et al. · Science · 1982 · 1.3K citations
Phase Transitions in Ionic Gels
Toyoichi Tanaka, David J. Fillmore, Shao-Tang Sun et al. · Physical Review Letters · 1980 · 1.2K citations
A reversibly antigen-responsive hydrogel
Takashi Miyata, Noriko Asami, Tadashi Uragami · Nature · 1999 · 1.2K citations
Natural Sciences, Bioengineering, Biomedical Engineering +11