Japanese Journal of Applied Physics · 2003 · 80 citations · 0 references
EngineeringElectrical EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsDevice ModelingPhotovoltaic DevicesPhotovoltaic MaterialsSemiconductor PhysicsSilicon MaterialsSolar CellsCurrent-voltage RelationsCurrent-voltage RelationshipEquivalent Circuit ModelingGrain BoundariesPolycrystalline SiliconRecombination CentersSilicon Solar CellsTemperature Dependence
We have evaluated the influence of grain boundaries on the temperature dependence of cell performance using a modified 2-diode equivalent circuit model. In this model, microscopic inhomogeneity of resistivity at or near grain boundaries can be taken into consideration. The calculated results by the modified 2-diode model agreed well with the measured current-voltage curves, and the validity of the fitting parameters in this model was discussed. One of the fitting parameters, r is defined as the ratio of the recombination area, in which the recombination of minority carriers is pronounced. At 20°C, r of the polycrystalline Si cell was larger than that of the single-crystalline Si cell. However, the difference in r between them became negligible at temperatures above 80°C. These dependences were explained by considering the behavior of the free carriers in the recombination centers.