Japanese Journal of Applied Physics · 2007 · 11 citations · 4 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsIon ImplantationLaser Material ProcessingOptical Properties Of SemiconductorsSemiconductor Device MaterialsSemiconductor LasersSilicon MaterialsAnnealingCarrier GenerationLaser AnnealingOptical AbsorptionSemiconductor Infrared MaterialsSheet ResistanceSiliconSilicon Annealing
We activated silicon implanted with phosphorus atoms by infrared semiconductor laser annealing with a diamond-like carbon (DLC) optical absorption layer. The silicon samples implanted with phosphorus atoms at 10 and 70 keV with concentrations of 5×1014, 1×1015, and 2×1015 cm-2 were coated with 200-nm-thick DLC films. The samples were annealed by irradiation with a 940 nm continuous wave laser at 70 kW/cm2 with a beam diameter of 180 µm. The laser beam was scanned using a moving stage at 3–20 cm/s, which gave an effective dwell time of 0.9–6.0 ms. The amorphized surface regions were recrystallized by laser annealing longer than 1.2 ms. The in-depth profile of phosphorus concentration hardly changed within 5 nm for laser annealing for 2.6 ms. The sheet resistance markedly decreased to 106 and 46 Ω/sq for the samples implanted with phosphorus atoms at 10 and 70 keV by laser annealing at a dwell time of 2.6 ms, respectively. Phosphorus atoms were effectively activated with a carrier density near the phosphorus concentration for implantation at 70 keV. A low carrier generation rate was observed for implantation at 2×1015 cm-2 and 10 keV. An intermediate SiO2 layer effectively blocked carbon incorporation to a level below 1017 cm-3.
4